Drupa 2016 - the legacy lives on

Drupa 2016 may seem like a distant memory to some people in this industry, but here at Universal the legacy of last year’s Drupa exhibition is still strongly felt. We met many new people who are now customers, or who are in the process of becoming customers. Exhibiting at Drupa also gave us the opportunity to spend some time showing existing customers some of our latest technical developments.

Being a part of Drupa was a great opportunity to show off our X6 Slitter Rewinder. With an estimated attendance of a third of a million people my colleagues who were on the exhibition stand had their work cut out for them. Over the eleven days of the show we had an overwhelming amount of interest in the machinery we were exhibiting. In addition to the X6 we also took a RT2 Roll Handling Trolley and a CCA Automatic Core Cutter to Dusseldorf with us.

When potential customers ask when they can see the machinery running it’s great to be able to run it right there on the exhibition stand. I’m not sure I saw many other exhibitors were were able to run their machines.

Helping design and organise exhibition stands is one of my favourite parts of my job. I’m already very much looking forward to Drupa 2020.

Comments

Trim removal on slitters

A trim fan attached to a slitter. As discussed previously on this blog the process of slitting (at its most basic) can be reduced to the one-line description of ' a big roll is loaded on one side of the slitter rewinder, and smaller rolls are loaded off the other side' and that's fine... most of the time. Here comes the example! If a 1000mm wide roll is loaded onto a rewinder and is slit down into rolls that are 212mm wide then four rolls would be produced. If your mental maths is up to scratch you might have noticed that 4x212 does not equal 1000, and that means that from the original / master / jumbo roll there will be roughly 117mm left over. Sometimes this happens because the edges of jumbo rolls are discarded due to damage, print reasons or simply because the material being slit isn't coated all the way to the edges of the roll. So what happens to this waste material? Waste material can be wound onto cores in the same way 'correct' rolls are, ...

We need to talk about how you're handling this...

At the risk of sounding like I'm marketing for them instead of Universal I'd like to mention Package Print Worldwide ( @PackPrintWorld ) again. We contributed to the safe materials handling article in the new issue of Package Print Worldwide, with particular focus given to our roll handling trolley . We have recently expanded the range of material handling attachments for the trolley and have seen the number of enquiries rise considerably. Sadly safety is a subject that is sometimes (thankfully only rarely) overlooked by some companies, and when it comes to safe roll handling the risk of personal injury is one that is easy to minimise with the correct equipment. We have priced our materials handling equipment at a level that should be easily affordable to all, so there's no excuse for lax safety! More roll handling information: Find out more about our roll handling trolley... Reducing roll handling risk and increasingly productivity...

Winding onto 6" cores on a slitter with 3" shafts

A (used) 6" differential ball chuck designed to fit a 60mm rewind shaft (once the 3" chucks have been removed!) I sometimes use this personal blog of mine to talk about the basics of slitting and rewinding, with the content partly led by thinking back to the questions I had when I first started working in the converting machinery industry. One of the first questions I had was 'how on earth can slitter rewinders with 3" rewind shafts be used for winding onto 6" cores?' A lot of converters and labellers / packaging companies regularly switch between winding onto 3" (76mm) and 6" (152mm) cores, which is one of the reasons we designed our Automatic Core Cutter to change between core sizes in under thirty seconds. But what do companies who predominantly wind onto 3" cores do when they need to wind onto 6" cores? The answer is actually quite simple - they remove the 3" ball chucks and slide on 6" core chucks! There are of...

Slitter Man

Search This Blog