Skip to main content

Small slitter machines, a closer look at the anatomy of a small footprint slitter.

The 'Slitter Anatomy' section on our website is proving very popular, but because the images that are used to explain which part performs which function are of our largest slitter (the Universal X9) I thought it might be useful to have a look at the anatomy of the duplex slitter we have at the other end of the range (the low cost, small footprint Universal X1).


Anatomy of a small slitter.

Unwind Section
The unwind section includes an airshaft for mounting the unwind / parent roll, this shaft lifts out so that it can be fed through the parent roll.  The parent / jumbo roll is then loaded back into the machine and secured using safety chucks.  The parent roll is held in place using bladders that expand when inflated and hold the roll in place.

Rewind section
The airshafts on the rewind section are fitted with air bladders that hold the cores for the finished rolls in place when inflated.  The airshafts are inflated via the touchscreen control panel.  The rewind shafts are held in place by safety chucks on one end and pivot joints on the other, the shafts released from the safety chuck and swing out to allow loading and unloading.


Find out more about the Universal X1 Slitter Rewinder...

Comments

Popular posts from this blog

Trim removal on slitters

A trim fan attached to a slitter. As discussed previously on this blog the process of slitting (at its most basic) can be reduced to the one-line description of ' a big roll is loaded on one side of the slitter rewinder, and smaller rolls are loaded off the other side'  and that's fine... most of the time. Here comes the example! If a 1000mm wide roll is loaded onto a rewinder and is slit down into rolls that are 212mm wide then four rolls would be produced.  If your mental maths is up to scratch you might have noticed that 4x212 does not equal 1000, and that means that from the original / master / jumbo roll there will be roughly 117mm left over.    Sometimes this happens because the edges of jumbo rolls are discarded due to damage, print reasons or simply because the material being slit isn't coated all the way to the edges of the roll. So what happens to this waste material? Waste material can be wound onto cores in the same way 'correct' rolls are, ...

Core Cutter demo video

Core Cutters have been at the forefront of my mind over the last few days, mostly because we have been working with our video team on a new demonstration video for our Automatic Core Cutter . You can view our rather smart new video below, and you can find out more about Automatic Core Cutters (and of course buy one) by contact me directly or by visiting  https://www.universalconvertingequipment.com/core-cutters/automatic-core-cutter P.S I'm taking bookings for Core Cutter demos down here in Ipswich at the moment, so get in touch if you want to come and have a go on one of our demonstration machines!

Slitter words mean what now?

Slitting / cutting machines are complex beasts, and so I guess it is perfectly natural that a complex vocabulary is spawned by discussing the methods and mechanics of slitting.  The corporate culture within companies that use converting machinery usually ensures that slitter operators and their management all speak the same language, but when a need arises for slitter users to speak to outside agencies (when buying or servicing machinery) then it can become a bit of a challenge making oneself understood. Introducing the Slitter Glossary. When new customers contact me about buying a new slitter (or upgrading / servicing an third-party machine) it is important to make sure I fully understand our customers' needs.  I concentrate a large portion of my energies  making the specification part of the buying process incredibly simple for our customers, and recently a part of that process has involved creating a glossary of slitter terms . The slitter glossary is a bit like a...